Please check the order confirmation screen for the exact number of points. Width 27 x Depth 20 x Height 28.5 cm.
Product (left): Material: Body, lid, bottom cover, ice holding plate, handle, rotating plate, adjustment plate unit / ABS resin (heat resistance 70 degrees, cold resistance -20 degrees), rotating part, lid handle / ABS resin (chrome) Plating (heat resistance 70 degrees, cold resistance -20 degrees), gear / bearing / polyacetal (heat resistance 100 degrees, cold resistance -20 degrees), shaft guide / ice cup / polyethylene (heat resistance 70 degrees, cold resistance -20 degrees), shaving blade / Spring / spike / stainless steel, frame / aluminum die cast (baking paint). You can enjoy two different textures with one unit! A shaved ice machine that can adjust the fineness of ice. There is no doubt that the family will be excited by the nostalgic Showa retro style that can be easily turned by turning it vertically! Since the height of the blade can be changed with the adjustment lever, you can enjoy two types of texture, "fine" and "coarse".Please adjust the smooth "fluffy ice" that melts in the mouth and the "crispy ice" that has a satisfying texture to your liking. The structure is such that the blade turns as the handle is turned, so ice can be evenly piled up in the bowl. Eliminates the hassle of turning the vessel! Before use, remove the packing attached to the shaving blade cover and the spikes on the holding plate. Rinse with dish detergent on a sponge before use. Attach the handle to the rotating part. The handle is tightened in the opposite direction to prevent the screws from loosening. Attach the handle to the handle mounting position of the rotating part by tightening the screw counterclockwise with a screwdriver.
> 1 Turn the lid counterclockwise and pull it up to remove it. Put the ice made in the attached ice making cup. For rough cutting, you can also use loose ice. In that case, be careful not to add too much ice cubes.3 Place the lid so that the main body and the holding plate do not collide, and while holding the lid with both hands, turn it clockwise to close the lid. 4 Rotate the rotating handle clockwise while pressing the lid handle downward firmly with one hand.
If the force to push the lid handle is weak, it may not be sharpened well. 5 Open the lid as in step 1 and discard the ice remaining in the ice holder / main body.
For details on "Preparations before use" and "Procedures for use", refer to the instruction manual. Note: The cutting edge is fixed. Use the adjustment lever to adjust the finish. Do not use in the dishwasher.
International Buyers - Please Note. Thank you for visiting our store! We carry a wide variety of Japanese branded items. All items are carefully selected and are brand new unless marked "used". We are most definitely sure you will be certified with our items!
This item is in the category "Home & Garden\Kitchen, Dining & Bar\Kitchen Tools & Gadgets\Other Kitchen Tools & Gadgets". The seller is "shoranjapan" and is located in this country: JP.