Photopolymer Plate Rubber Stamp Seal Making Maker Machine

  

Photopolymer Plate Rubber Stamp Seal Making Maker Machine. This photopolymer plate has two layers: the upper layer can solidify after UV exposure, and the rest of it can dissolve in the water. The black button is always on. Switch to second and press the red button. Please pay attention to the optical plate to regulate the ray.

Please connect to a plug board, otherwise, the machine would be broken. The original stamp image can be prepared in many different ways.

The preferred method is to use a personal computer and a simple "desktop publishing" software program along with a printer for good image resolution. Customer provided copy needs to be scanned for printing by the printer. To make a negative with the exposure unit, the original copy must be printed on transparency film. It is translucent, allowing light to pass through. According to the size of the designed image, cut off the plate which is larger than the image with scissors.

Important tips:While cutting plate, you should try to avoid strong light. Paste printing side of transparency with the plate.

Place the plate on the UV exposing machine with suitable pressure above to ensure that the plate closes to the glass tightly. Set exposure time for about 1 minutes If you use different types of exposing machine, please do experiments in advance to master the best time of exposure. Washing of the photopolymer plate is done by hand with warm water and a soft scrub brush. About three minutes are required to thoroughly wash a plate.

Place the plate on the exposure unit for solidification about 2 minutes. Stick the plate on the all kinds of holder for easy stamping.

These charges are the buyers responsibility. We will track the item all the time until it is reached to you. Return accepted in 30 days after the item reached to you. Return package must be in the original packaging, everything must be in new condition. If you have a question or concern before or after receiving your item, please do not hesitate to contact our customer service team by clicking on the "Ask a question" link in the bottom left.

The item "Photopolymer Plate Rubber Stamp Seal Making Maker Machine" is in sale since Wednesday, November 28, 2018. This item is in the category "Crafts\Stamping & Embossing\Stamps".

The seller is "topmalls" and is located in zhengzhou. This item can be shipped worldwide.